Connecting 2 PCs to the HP PSC 1610 Printer at the same time

Hi,
I think your printer required maintenance, because printer time all parts working then your printer print. I gas you some points link printer belt, printer header, printer roller..so any one damage or this types of issue create, so i suggest you contact HP printer technician and check it.

Thanks,
HP Printer Support

HP PSC 1610 is not wireless. You can connect via USB to computer width wireless and share them.

Hi

you need to reinstall your printer using olny your cd
1.disconect your printer
2.run setup from your cd
3.connect the printer only when setup ask you to do it

PS vote us to keep us alive

HP PSC 1610 All-In-One InkJet Printer Printer HP PSC 1610 always printed till I... Answer I think I have a similar problem:HP PSC 1610 always printed till I installed Mac OS X 10.6. also does not digitalize since I downloaded: HP_Installer_PSC1600_v9.7 An error apears about a missing extention ? ? ? ? Carlos Moniz

Hi, the answer is no you cannot, the printer will only work if both cartridges (black and color) are installed, if you install just one the check print cartridge light will flash.

Hope this helps

Muzzi_123

For reliable wireless printing I setup an IP address on the printer. Then you can print from any device on that network.

Go to www.HP.com and choose Support and Downloads. You should find your information there.

You need a USB printer cable. You can get that at any computer store

Hi ,
if u want prosiger for installation of psc 2355 please follow the steps

• frist u remove printer usb cable from CPU
• uninstall all drivers & software of printer withc u try ...
• insert installation cd in rom
• start installation & follow the steps .
• it will get massage looking for new hardware or please connect u r printer
• please connect u r printer in online
• make sure u r printer is power on before u connecting to u r CPU
• it will get recocnised u r printer follow the instructions
• get finish installation.

check in printers it will be install or not ...


if this information is useful for u please Rate me.............

It is very important you follow ALL of Hp's instruction at the link provided below for uninstalling your PCS software. Than go to the bottom of the link and also follow the instruction to run the uninstall utility called "Uninstall.bat"
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00265838&cc=us&lc=en&dlc=en&product=390315&dlc=en&lang=en
Reinstall your driver software from Hp's download site. (these are updated drivers).
Most of the time its a good idea to follow the instruction during installation.