Has no disc. How to connect lexmark E330 to computer

Are you, by any chance, trying to print a PDF file? If so, you need to use the print feature in the PDF reader and not the print capabilities of your operating system.

When you removed the jambed paper, did the paper come out in one piece, if not did all the pieces that was removed make up the entire sheet of paper?
Otherwise there may be still a small piece/s of paper still in the printer which is causing this error message.

Lexmark e330 is compatible with Windows 7. Click here to download the drivers from the Lexmark Official Support. Select the Operating System (OS), Windows 7 (32-bit OR 64-bit Version).

Let me know if any further clarification/ assistance is required.
Hope it helps! Good Luck!
Don't forget to convey your feedback
CreativeTECH

Page count reset

1 - Turn off the printer;
2 - Open frontside door;
3 - Hold "CANCEL" wait leds blink;
4 - Release "CANCEL;
5 - Close the door.

This is the end of the history.

Check the manufacturer's web-site:

http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_CA&question=e330+&productCode=LEXMARK_E330&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.MONOLASER.LEXMARK_E330&searchid=1262450478240#1

for their statement about device-drivers for Windows 7.

If the device-drivers are available, you can download from this web-site.

error light on out of paper also toner light is flashing but its a new toner kit and there is no paper jam

I had a similar problem, On inspection I found out the rubber wheels in the paper tray section were missing ( Some kinda manufacturing fault) (or somebody played a very absurd joke on me) anyways I put rubber bands on those plastic rollers and Viola its perfect...

Procedure:

1. Remove paper tray
2. turn your printer upside down
3. u will see two wheels connected with a lever
4. check if they have rubbers on them
5. if not , role a rubber band on them .

hope that helps...

Please use this link it may be helpful:::



http://support.lexmark.com/cgi-perl/knowledgebase.cgi

I am borrowing the lexmark from a friend and need to fax. Does the paper with the writing go face down or up?

Hi you can try liberty parts? If your an end user you will have to try printerworks. Hope this helps.