Questions & Answers for: Dometic 12v

...the rear panel and remove the cover from the control board on the left lower side. There is also a 12V located on this board. Check to make sure that 12V is passing through the fuse to the board. If ...

I pulled out my refrig to replace the drain hose after disconnecting the 120v/12v/gas service (slid straight out no more than 10 degree tilt). After reinstalling and completion of reconnects I do not ...

...gas - not electric. What do we need? Hi Most of these mobile refrigerators can run on gas, 120v or 12v, your gas option is obviously OK, there should be electrical connections on the back of the

Dometic 2652 does not cool that well. Food spoils. Placed 12V fans on fins and another on the lower portion. 46-58 degrees. No help. Replaced with circuit board #3308741.002 and no-go. I have no 12V ...

replaced control board have 115 to board can't get 12v nothing lights on frig or in side where does 12v come from voltage is good in camper Couchman with Dometic md RM2652 The 12V comes from 2 wires ...

...the circuit board and still nothing. Please help. Won't come on You need to ensure you have 12V going to the fridge. Also insure you have 12V on both sides of the terminal block in which the ...

...for it to power up? Even though this unit does plug into a 110ac power supply it also requires 12v to power the circuit boards and the unit will not work with out the 12v. On the back side of

is disc bad? Sounds like disc is bypassed. The refrigerator will not work on LP or electric without 12v power. The 12v power is supposed to go through the disc as a safety fail safe measure to prevent

Wiring new A/C I have a 12v supply at the A/C roof opening. I'm replacing an old Coleman A/C. The new control box, which has to be mounted somewhere in the roof opening, has 3 12v wires coming out ...

Wiring new A/C I have a 12v supply at the A/C roof opening. I'm replacing an old Coleman A/C. The new control box, which has to be mounted somewhere in the roof opening, has 3 12v wires coming out ...