...ranger? when starting vehicle, very loud grinding noise, maybe starter or flywheel? Bleed right side first...open valve on caliper and have someone step gently down on brake. close bleeder. repeat ...
...hung up with the flywheel for about ten seconds after it starts is there any way to shim starter away from flywheel Change starter Bendix, or whole starter. Bendix is sticking... not getting hung
...be is the starter selinoid is not funtioning properly. Bottom line, you need a new starter or a new flywheel. But I would make sure that the 2 bolts that hold the starter in place are tight
1988 Ford Ranger Starter spins will not engage flywheel Replaced starter have new starter, starter spins but will not engage the flywheel and crank the motor Fixed it get a flywheel shim .0040. For ...
...flywheel are usually a result of a starter problem such as a drive or the starter not lined up properly or loose causing the starter driver gear to mismatch with the teeth on the ring gear. This ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
