Questions & Answers for: 1997 cadillac deville crank sensor

1997 cadillac concourde deville, car wont start until the anti theft system goes thru the wait 3 minute then crank car process 5 times help Try to reset the p.c. by unpluging the batt. for 10 min that

...1997 cadillac Deville.PCM codes Codes are P0135 and P0404. PO135 is oxygen sensor Bank1 sensor1. PO404 is EGR. personally, I'd pull EGR off, clean pintle good with throttle body cleaner or carb ...

98 anti theft will not let car crank have new key still will not start have tried everything I recently had the same problem, I ended up changing the TWO crank shaft sensors and the big 40 Amp fuse ...

...cadillac deville wont start, i t has oxygen spark and fuel, i've changed sensors, the lock key cylinder, the relays and fuses are working fine, it cranks over but it does not start could be bad ...

- diagnosed professionally 02 cadillac deville - r&r crank sensor need help - advisability of doing it - reasonable mechanical expertise search ( mitchell1diy) this is a repair site you can access

...located at on a 1997 cadillac sedan deville northstar engine The knock sensor is located under the intake manifold.The starter is also located under the intake manifold.Hope this helps.Good

1997 cadillac deville is having a hard time starting. It takes a few untill it starts. Then when it does start i smell gas. The smell seems to be coming from the gas tank area underneath the car. what

1997 Cadillac Deville Vin Y hard starting The car doesn't start when cold and sometimes when warm until cranking for at least 4 or 5 seconds. Have tried new spark plugs and wires, spacers for ...

...1997 NHTSA CAMPAIGN NUMBER: 97V183000 GM/EVAPORATIVE EMISSIONS HARNESSTHE HARNESS COULD INTERFERE WITH THE CRUISE CONTROL AND THROTTLE LINKAGE PREVENTING RETURN TO A CLOSED THROTTLE. 1998 Cadillac ...

1997 Cadillac DeVille, Battery dead, replaced Battery and now Security horn blasts and it will turn over but not start. You will need to reset the security system after a battery disconnect. How do i ...