Questions & Answers for: 1999 ford ranger transfer case

...1999 Ford Ranger and when i engage the four wheel drive in high or low the transfer case engages but the front hubs wont engage its most likely one hub isnt locking . you need to take the hub apart ...

...1999 have a ford ranger xlt 4x4 1999 my light of 4x4 stock on hi and low and there's only traction on rear weels no sound of transfer case work at all?????? have solenoid that engages 4x4 ...

1999 ford ranger 4x4 wont engage have a 1999 ford ranger auto 3.0L sounds says its dropping into 4x4 when you turn the switch you can here it click in but its not engageing the front axle any one know

...ford ranger. I replaced the 4wd transfer cased encoder. It was located right next to the transfer case. Hope this helps. ...

...will not engage on 99 ford ranger. is there a fuse and where is it located Transfer case motor it could be a number of things most likely a vacume line usually aroung the front bumper under the air ...

...ford ranger manual trans v-6 4.0L lights on dash light up when switch is turned and transfer case seems to shift power into low, but front tires do not engage if the actuateor is vacumed,you might ...

...transfer case. Don't get it from Ford (too expensive), try Rockauto.com In other cases the "4x4" light can go off when you push that button but the transfer case will still be engaged (still in

ranger? this is a rear wheel drive vehicle and as such the rear wheels are always engaged.when in 4 wheel drive the transfer case in gages and the front differential connects and is engaged.unless the

...ford ranger transfer case engages but the wheel will not engage transfer case engages but the hubs do not i know the hubs are good you may have lock outs on your wheels these need to be engaged ...

ford ranger 1990 4x4 when hubs are engaged 4x4 still dont work and control lites come one and off on own when i turn my 1990 for ranger 4x4 with manual hubs and push button transfer case the lights ...