Questions & Answers for: 2000 blazer fuel tank removal

2000 blazer the gage will go all the way to full. Once it gets to 3/4 of a tank and in between a half a tank the needle goes to empty, and when i rock the truck the needle goes back to full? any ideas

...2000 blazer no you have to remove the fuel tank I wish it did but nope sorry you have to remove the tank to access the fuel pump. Its not that hard to remove as long vas tank is as close to empty as ...

2000 blazer , every once in a while it wont start... let sit sometimes 30 minutes sometimes 2 days and it starts. Put external fuel pressure gauge on... B4, when key on... gauge shows over 60 lbs. ...

2000 chevy blazer fuel pump and help the gas tank will be needed to be dropped to gain access to the top of the tank to remove the sender with the attaching fuel pump on it. basicly you disconnect all

2000 blazer (4.3 6 cil) how can I get it out? disconnect the filler tube,place a floor jack under the tank,remove the strap bolts, lower the tank,(just a little)disconnect the electical,lower a little

...2000 blazer (4.3, 6 cil) how can I get it out? unmount the tank? what do you mean by wrong fuel? if it's not diesel fuel then you may be ok There is a bolt under the gas tank. You will need to go ...

...2000 blazer? Hello bottlebistro: My name is Roger and I will help wih your question: The fuel pump on your vehicle is located in the fuel tank. In order to gain access to the fuel pump you will need ...

...2000 chevy blazer will not start. If I hit the gas tank while it is being started it will sometimes start. I am wondering if this is a fuel pump problem or a fuel filter problem. It never sputters or ...

Access to fuel pump The pump is in the gas tank and tank must be removed for access. Remove the fuel tank.

2000 chevy blazer fuel gauge dont work I have repaired many of these vehicles. Usually it is the sender inside of the fuel tank that fails it is very common on the blazers. very rarely have I seen it ...