Questions & Answers for: 2000 ford ranger rear brakes

...2000 ford ranger can't get the rear brakes to not be so tight, any suggestions for free online diagram. \ I just replace mine this weekend. I know how you feel. jack it up, take rear wheels off, take ...

...2000 ford ranger 4.0 V6..XLT..Just recently I have been having a problem with my emergency brake light staying on and flickering. The light go's off after awhile. The brake it self seems to pull, I ...

2000 ranger 6 cyl still have brakes Had a similar issue on an old Mazda pickup that was really a Ford. I found that the issue was with an ABS sensor mounted near the rear axle. When I opened the cover

...2000 ford ranger thats leaking brake fluid from the rear everytime i hit the brakes it shoots fluid from the little thing in the back that splits the brake line i was wandering what the piece is ...

rear brakes turned drums brakes will not adjust down to let drum turn freely Then you have the parts together wrong You didn't do both side the same,better do that, & see how the other side is

...2000 ford Ranger replaced rear brakes now they grab for the first few times i use them then they seem to work prettygood but every so often they appear to jump like rotors are warped but they are new ...

...2000 ford ranger xl 4x4 Badly rusted part (connection) caused rubber hose to "pop-off" thus losing all fluid. I Mickey-Moused it by re-attaching with 2 small radiator clamps. I acquired a ...

...2000 ford ranger seem to slide when stopping at a stop sign it is not sliding but appears and feels like it is on ice Broken rear leaf spring, bad motor or transmission mount. Broken frame or brake ...

2000 ford ranger 2wd rear driver side tire won't turn I can go in reverse but not forward any suggestions? Thin brake lining have allowed the wheel cylinders to over extend locking the wheel. You will

2000 ford ranger rear brake sticking I completly replaced everything inside drum and brake line. The only other thing I can come up with is e-brake I engaged And release cable is moving any suggestion