Questions & Answers for: 2000 nissan altima valve cover

...2000 nissan altima i need to know this so i could properly tighten the valve cover to stop a gas leak that i have, oh and i also need the pressure or something like that thanks No spec for torque. ...

97 nissan altima torque What is the torque I should you on the Valve Cover nuts? 69 to 95 inch pounds on a 2.4

2000 nissan altima se? the pvc valve is right on top of the valve cover if you do not know what the valve cover is it is were you put the engine oil into the car. there are 2 covers on has the deal to

2000 Nissan Altima - 1,27,000 miles replace the front oil seal. first i would clean the engine with purple power (degrease etc.) then look at the engine and make sure the leak is not coming from above

...2000 nissan altima is accelarating slowly just got valve cover gasket done, oil change, spark plugs,thermastat and all mounts.now the service engiene soon light is off what could be the problem that ...

...valve cover gaskets on a 2000 frontier v 6 how to replace valve cover gaskets on a 2000 frontier v 6 truck torque specs for the rocker cover (valve cover) screws: 9 - 26 inch lbs step one- 9 in lbs ...

...be done like shooting in the dark without knowing the problem. I have Nissan Altima 2000 & they have code p0744 then I change torque convertor. and agene it came the code what is the

Need torque specs fo valve cover on 2002 nissan altima 3.5 13 -16lbs

...Nissan Altima 2000? Leaking oil; misfiring according to the diagnosis A dealer will be the most expensive - usually, and local shop will be less - sometimes a lot less. Check w/friends/family for ...

Is it safe to continue to drive the car before fixing or replacing an engine valve cover gasket (Nissan Altima 2000)? Not at all. It could be very damaging to the engine.