Questions & Answers for: 2001 dodge caravan blower motor

2001 Dodge Caravan A/C electrical for the blower. It appears the power plug to the blower under the glove box has shorted out and melted the connections. I would like to determine voltages and replace

...the rear blower motor resistor on 2001 dodge caravan? Where can I find a diagram? no diagrams avil on fixya, sorry, the blower resistor is right next to the blower motor in the air duct that cools

...dodge caravan. blower motor only worked on high then quit. replaced resistor, and the relay for the blower motor curcit, and still nothing, what else could it be the blower motor itself an open fuse ...

...2001 grand caravan sport 3.3L and the fan switch will only work in the high position,what may be the reason for this? THANKS sounds like it is the blower fan resistor, there is a wire for every speed ...

...2001 Dodge Grand Caravan Sport the front heater/air conditioner blower stopped working but the rear blower still works fine. Could it possibly just need a new front relay blower? First check the ...

...2001 Grand Caravan. Replaced resistor once new one fried connection. Saw review online that the resistor diode may be the culprit. Have same rely fuse and blower motor in van. Also, can this fry the ...

2001 dodge caravan Ac comes on but will not blow ay any speed . I replaced blower motor resistor. try tapping the bottom of the blower motor with the blower motor speed selector turned to high and the

...controls the speeds ,There is also a blower motor relay in the under hood fuse box . Dodge calls it intelligent power module.You can go to you tube a search blower motor trouble shooting an repair

...blower motor, thermostat and relay. Any ideas as to what it could be/ I do daycare and need the front heat. In the diagram, check fuse 10--40 amp, not only check the fuse, check the fuse circuit for ...

...Dodge Grand Caravan front blower RELAY location? For the front blower motor, there isn't an individual relay. Note the diagram. The two wires at blower motor, one should be voltage and the other ...