Questions & Answers for: 2001 hyundai santa fe cam

...2001 hyundai santefe won't start. I diagnosed it and had this code, P0340 camshaft position sensor mulfunction, I checked the wiring system, replaced the cam sensor, but still keep having the same ...

...2001 4 cyl hyundai santa fe,i have i have no spark on my hyundai santa fe,i have replaced the coils the computer the plugs and i have cked the plugs i replaced the cam senser,is there another ...

What is the name of the sensor at the cam with three wires orange, black and blue? Cam Shaft Position Sensor,

in hyundai santa fe 2001 If it is the 2.4 (4cyl) or 3.5 (6cyl) it is behind the timing belt. If it is a 2.7 (6cyl) it is located on the engine near the bellhousing, bank two side (side facing radiator

...Santa Fe has got spark,and petrol, but only to the fuel rail ,the plugs are dry. I changed the ignition ,transponder , keys,and ecu, at my wits end ,please help You just narrowed the solution down, ...

...2001 hyundai santa fe but it turns over but wont start we replaced the crankshaft positioning sensor cam positioning sensor and the spark sensor. why no spark? There is a recall on this contact your ...

...2001 Hyundai Santa Fe When trouble shooting PO 340 showed that the camshaft position sensor signal is monitored for errors. Cant find a picture or the cam sensor or place where it goes. ...

hyundai 2.7 P303, P306 at the same time 107,000 Miles. plugs and plug wires about 10,000 miles on new ones. Coil pack fires Cyl 3 and six together. No problem with cyl 1 and 4 or 2 and 5 at this time.

...santa fe starts fine, but when you come to a stop sign within the first 10 minutes it either just stops, or seems to fall out of gear and you can rev the engine but no power forward, with a no lights ...

...sensor on a 2001 Hyundai Santa Fe with a 2.7 v 6 motor The Cam sensor is on the drivers side and in the front of the valve cover gasket it should have 3 wires headed into as well hopes this ...