...2001(chrysler)Dodge Intrepid has began to stall out while driving or idle at a stoplight. I took to a mechanic they mentioned something about No crank signal at PCM... co p0320. they said because the ...
...Intrepid cranks over won't fire I have changed the crank sensor, cam position sensor, coil condenser pack, ignition module, key module in steering column, plugs, plug wires, is getting fuel to the ...
2001 intrepid first problem oil light flickers when gas is accelerated. drove on freeway accelerated gas to catch speed and had to come up once came up it cut off on me and would not start back up. ...
...2001 Intrepid R/T (3.5L) that stalls under heavy breaking. It has just started happening in the last month and has occurred three times. I have plugged it in and have found no codes. Any suggestions? ...
car starts normal but when put in reverse or drive, stalls and shuts down? It sounds like the automatic transmission converter may be locked up. Could be a bad crank/ cam sensor
having trouble starting, now check engine light on and stalls and sputters Check all the wires and connections on the engine wiring harnesses first. Look for physical damage and heat damage in ...
Question about 1995 Intrepid
...Intrepid - PRE OBD2 I have this same NO START problem as many others... Began with tach giving readings not exceding 1200 rpm with strange 4000 + spikes.. Cruse control would not turn on or off at ...
2001 dodge intrepid r/t 3.5 starts fine and runs fine but eventually it stalls and/or idles rough at stops.... possible the EGR valve check for any codes or check engine light on
Question about 2001 Durango
2001 Durango 4.7l. Can there still be spark at all the plugs if the PCM is faulty? This may or may not be the cause, On the 4.7L V8 engine, the Camshaft position sensor failure can cause the engine to
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
