Questions & Answers for: Ford Explorer Sport Trac 2002 timing

Question about 2002 Explorer Sport Trac

1 Answer

starts up and would not idle all the time I had a 98 ford , same problem , mine was the idle control valve, It was 40.00 , put on myself. melissa

Ad

Question about 2002 Explorer Sport Trac

1 Answer

mcchanged transmission fliud having trouble reading dip stick The fluid has to be checked with the engine running and the trans needs to be cycled in and oul of gear a few times. The fluild may have ...

Ad

Question about 2002 Explorer Sport Trac

1 Answer

where is the egr valve located on a 2002 ford explorer sporttrac? the hose was loose last time i had it checked and now the check engine light is on again, had that checked and it was again the egr ...

Question about 2002 Explorer Sport Trac

1 Answer

CHANGE FRONT TIMING CHain. Vehicle starts then shuts off. Want to line up timing marks, but not sure about marks. Need to find out how to align cam timing Hello! Here is a diagram of correct timing...

Question about 2002 Explorer Sport Trac

1 Answer

2002 ford explorer sport trac , starts fine, runs good then about 30 min it starts to run rough,and idling poorly, not fuel or fuel filter You need to check your plug wires for cracks and wear. The ...

...2002 4.0 Sport Track Timing Chain & guides replacement Diagrams Ford 2002 4.0 Sport Track why not buy a manual as it has a lot of good info you will need and you will probably use the manual for ...

Question about 2002 Explorer Sport Trac

1 Answer

rattling in Engine It at time has rattling sound from engine You might want to check your alternator pulley/decoupler.

estimated time to replace a shifting fork start to finish need a parts price list and a labor estimate time Book time is 8.8 hours. New part from dealer is up to $150, depending on the fork.. Dealer ...

my ford explore 2002 sport trac has hard starting problem.all the time i have to kick 3 times before it starts Use brake clean and clean the throttle body and the mass air flow sensor. Use a brush on ...

need help getting multiple misfire and camshaft sensor and crankshaft sensor can it be the timing chain or is it pcm You are getting cam & crank sensor errors along with multiple misfires and you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...