1994 DODGE RAM 1500 LONG BED TORQUE CONVERTER LOCKUP. PLEASE ADVISE ME what is the problem with it??
...wheel bearings on a 2005 chev 3500 deisel 4x4. I know thwe who;e hub must be replaced but how do I remove it? remove cv outer nut, tire brake caliper and lower ball joint use a bar to pry against ...
...1500 4x4 wheel bearing jack up pull wheel, pull brake caliper and bracket, take nut off axle in center of bearing on back side where axle goes in should be 4 bolts make sure to dis connect abs sensor ...
Wheel-Bearing-Hub-Assembly-Front/_/N-jnpe7Z8kns If I helped...please rate me...thanks! I agree my abs light came on a week before my bearing went out replaced bearing and hub which takes about an hour
...Baring Torke spec 2 wheel drive should be between 12-15 ft-lbs4 wheel drive would be between 130-135 ft-lbs The wheel bearing to knuckle torque spec is 133 lb-ft The axle nut torque spec is 177
Question about 2005 Silverado
what are the torch specs for an 2005 chevy silverado 2500 hd with a 6.0L Torque specs for what? Headbolts, rods, mains, ring gear, lug nuts?
what are the torque specs for a 93 chevy silverado torque specs and sequence on heads Heads 65 rods bearings 45 mains bearings 65 all are in foot pounds,,, not sure on intake but i think 20 foot pound
Torque spec for the front hub assembly. 4x4 Z71. anytime you put a hub back on for the bearing always turn it tight but no crazy tight , back off 1/4 turn so you do not crush the bearing ,
Question about 2005 Silverado
what are to torque specs for valve covers on a 2005 5.3 silverado rocker arm cover-- 106 inch lbs.
...so; year make model (the part - cylinder head, main bearing caps etc) torque specifications Usually when you find one, they are all listed. please put year make model in all Fixya vehicle ...
Usually answered in minutes!
1,100 Questions
795 Questions
556 Questions
393 Questions
396 Questions