Question about Pmp3000 16 Channel Audio Mixer
...amp and it wont cause the fuse was blown. replaced it with the same fuse 250v 6.3A and turn it on again and a burn smell came out of it. i turned it of, cheked the fuse, the fuse was ok but the unit ...
I need to purchase a fuse for my gigrac 600 amp and can't find one...ceramic, 10 amp 250v Checkout Tools2Parts: http://www.tools2parts.com/Bussman-ABC-10BC-p/1031-1710.htm
...250v (external fuse) replaced and instantly blows again. Used the amp for 2month US tour in support of Satriani with zero problems The amp has likely got a shorted output section or a shorted ...
Question about Tube Screamer Series TSA15H Head and TSA112C 1x12 Half Stack
...amp. Putting a smaller fuse will only cause it to blow easier...not sure what Ibanez techs were thinking. Mine blows with 500mA fuse...usually because failing to let it warm up the 30 seconds with ...
Question about Tube Screamer Series TSA15H Head and TSA112C 1x12 Half Stack
...250v 1 amp fuse and they blew twice. noting else is wrong. so instead of being a smart ****, please enlighten this tech idiot as to what the fuse may look like? oh i know, its a cylender with wire ...
peavey xr600f Need to know what size of fuse is needed for the Peavey XR600F. I tried to use the amp after years of sitting and see there is no fuse. 250V 8A SL(Slow-Blow)
Question about Bx4500h Ultrabass 450w Bass Amplifier
...250v. There may be other causes, but in my case, this is the solution. I work on car amps..and if a fuse is blowing it is almost always the output transistors..shorted...if this amp has tubes then I ...
Question about Ultratone K3000fx 300w Keyboard Amplifier New
...250V fuse for a K3000FX 300Watt Keyboard Amp? Fuse is blown, need a new one. Start with a 5 amp fuse and see if that holds. If it doesn't go to 10 amp. If that pops, you will have a power supply or ...
Question about Ultratone K3000fx 300w Keyboard Amplifier New
...250V slow-blow fuse. Insert the new fuse into the holder and press it down until it clicks into place. Close the fuse holder by gently pressing it back into place. Once you have replaced the fuse, ...
Usually answered in minutes!
297 Questions
191 Questions
155 Questions
161 Questions
136 Questions