When it gets warm it stalls I have a 89 jeep Cherokee and when it runs for an hour or so it will stall out. When it cools down it sometimes will start right back up and sometimes it takes a few cranks
REPLACING CRANKSENSOR WHAT IS THE EASIEST WAY TO GET AT AND REPLACE THE CRANKSENSOR ON MY 4.0 JEEP CHEROKEE 1998. I KNOW WHERE IT IS I JUST CAN'T FIGURE OUT HOW TO GET MY HANDS TO IT I change it from ...
Question about Valiant 6380iPTD-01 Notebook
lost my user manual for the vaillant boiler ecotec plus 824 R1 I have lost my user manual for the vaillant boiler ecotec plus 824 R1. could you help me how i can set up the times for heating. Thank ...
how timing mark chain gear on sunfire motor 2.2 ecotec timing maqrks engine 2.2 ecotec pontiac sunfire 2004
Where is the crankshaft position sensor located on a1999 cadillac seville For a 1999 seville the crank shaft sensor is located on the leftside of the engine right above the oil preasure switch, heres ...
The tach on the dash reads the correct rpm but the scan tool (Snap On Modis)is reading random rpm from 300 to 5000 at idle.Car has random stall and no idle but drives fine look for restrictions in ...
what do code p1391 mean i want to know what do code p1391 mean P1391 means intermittent loss of CKP and CMP , these sensor are monitor when the engine cranking,or running,These can come from a damage ...
Where's the cranksensor on a 2001 ford taurus Where's the cranksensor on a 2001 ford taurus It is located near the crankshaft front pulley, remove the inner wheel well liner to see it and ...
Question about 1993 Cutlass Supreme
where is the intake camshaft position sensor located on a 2013 Malibu 2.4 ecotec? P0010, P0011 (Intake/Exhaust Camshaft Solenoid) 2013 Chevy ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions