Questions & Answers for: radio mon button

while turning the radio on. Continue to hold the PTT and MON until the radio stops making noise. You are then in programming mode and can use the menu button to walk through the stages of programming

MON until the radio stops making noise. You are then in programming mode and can use the menu button to walk through the stages of programming. Use the PTT to change the settings, and the MENU to lock

...mon' and other button on front of radio,  person who gave us 3 radios is not longer available. You do not mention the type of radio you have, so our answer will be rather generic. The "MON" ...

...MON button, as you will hear all radio traffic anyway. For simple operation of your radio, set all your radios identical to one another with the same frequency, code and Qt filter (if any). Use the ...

...button since it is only a receiver. If this is the correct model for which you are trying to find a part, they can be ordered directly from Uniden. Listed below are their phone numbers, as found on ...

My UH043SX-2 seems to be stuck on RX, I can talk on it but not hear an answer. We have 6 of them all with the same problem. Uniden says to turn off holding down the mon and scn buttons. Then hold down

What does "mon" button under What does "mon" button under press to talk do? MON (monitor) button. Enables the loudspeaker for monitoring of the tuned channel when CTCSS/DCS is enabled.

...radio allows you to listen for weak signals onthe current channel at the press of a key.To turn ON the Monitor Mode:• For brief listening, press MON button. The RXicon blinks.For brief listening, ...

...The MON button is the Monitor button. It turns off any private line code settings you have temporarily so you can hear all radio traffic on your

signal that can't break the squelch threshold you have set. Some radios allow you to lock it open by pressing and holding the MON button for a few seconds. Turn the feature off my doing the same thing