Questions & Answers for: Mitsubishi WD 30 inch hdtv

30 seconds, the green timer light turns off and the red status light turns on. I've tried changing the bulb with the same results. When reset, the green light flashes and goes out but when re-powering

...inch DLP television the green status light keeps blinking rapidly. I have pressed the reset numerous times, holding from 10 to 30 seconds. Unplugging the set for 30 to 120 seconds. I have removed and ...

...73' rear projection Mitsubishi turns on, an in My 73' rear projection Mitsubishi turns ON, and in 30 sec screen blackens from the bottom up, leaving only about 5 inches on the top. Then, in another ...

...inch Mitsubishi Projection TV. When the tv first turns on it is fine but after about 30 minutes the colors all gets wacked and pictures starts flashing. What could be wrong now? the light engine has ...

...30 seconds the tv will shut down and will need the power reset to be able to turn back on. So right now I can only watch the HDMI source that is connected. The E2P module need replaced. If it is not ...

inch dlp hd 1080p and we had a bad storm but we do have a surge protector on the tv. When we went to watch the tv after the storm it turned on fine but the dish had to reboot. After watching for about

inch DLP tv how do i fix i cant get sound to my tv tried different cords different chanals even tried unpluging the tv for 30 sec. nothing worked check to see if with a rear audio/video input you have

HOW REPLACE THE LAMP POWER BUTTON WENT TO RED. NO PICTURE BUT DO HAVE SOUND Here's the manual. Read page 25 to 30. http://www.hdtvsolutions.com/pdf/638c10.pdf Good Luck www.aaatvservice.com