...light would come on, but when I stepped on the break the light went off. I replaced the bulb with a 3157 per the owners manual, but it still would not work. Last night, I was informed by a motorist ...
...a few days ago that the break light on the drivers side was not working. I replaced the bulb with a 3157 per the owner's manual, but it still would not work. I pulled the same bulb from the passenger ...
...inside liner out to get to the 3rd screw ? Rear: Brake, Back-up, Tail, Turn signal (3 bulbs, all # 3157) To access the rear bulbs, open the liftgate and remove the two phillips head screws from the ...
...Beam Headlamp Bulb Size: 9007 High Beam Headlamp Bulb Size: 9007 Parking Light Bulb Size: 2825 or 3157 Front Turn Signal Light Bulb Size: 3157 Rear Turn Signal Light Bulb Size: 3757ALL Tail Light ...
...brake light how do i replace brake light Rear: Brake, Back-up, Tail, Turn signal (3 bulbs, all # 3157): To access the rear bulbs, open the liftgate and remove the two phillips head screws from the ...
...scocket and turning the socket to the left. The bulb just pulls stright out and the new one is a 3157 a 3057 will work the back up light and the yellow turn signal are 3156 put in the ones you
which bulb is for the rear break and taillight 3157
How do you get the brake light bulb out of the its holder? Welcome to FIxYa.com Parts: 3157 Brake light How to Remove bulb: Remove the Lamp unit from the end of the quarter panel. "Open tailgate to ...
...and both of my brake lights don't come on at all. I replaced the bulbs already with bulb number 3157. Still no brake lights when I step on the pedal. I checked fuse position 23 and 15 amp fuse is ...
...for voltage and proper ground at the socket. If power and ground are correct replace the bulb. (3157 bulb) If the problem is ground you can run a new wire to a nearby piece of bare metal to ...
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions