Questions & Answers for: 4l60e speed sensor

...4L60E trans,and the speed sensor is located in the tailshaft of the trans.The tailshaft is located on the rear of the trans,and is held onto the trans with 4,15mm bolts.The driveshaft slips into the ...

...speed sensor is in the transfer case, so that wouldn't be an issue. The 4L60E used in '93 and '94 will only work in those model year vehicles, because of the type of shift solenoids used. The newer ...

...speed mechanism.It is responsible for the TIMING of the upshifts,and is responsible for the trans being in first (low) gear from a standing start.In 1993,the 4L60E was introduced to the lineup.Same ...

go into passing gear it goes into neutral when lifting accelerator ot goes back into gear, is this a speed sensor or a trans. input sensor, or the tps sensor Do you know if you have a 4L60E or a 4L80E

...speed sensor checked on the transmission. I believe that truck has a 4L60E transmission in it. If so, the sensor is on the left rear of the case. check the ignition switch. just had to do the same ...

...4l60e that only has a vss sensor. Could I use the stock harness, if so which speed sensor should I plug it into the speed in sensor, or the speed out? This isn't going to work without a lot of work. ...

...4L60E its a 2 pice case same length same plug ins the speed sensor is on opisite side the cooler lines are different but i can make lines does the computer see it or not as the wiring plugs are ...

...4l60e with a 4l80e have everything done but i need to hook up the input speed sensor to my ecm how do i do this Change speed sensor plug in did you also change the ecm because you have are it won't ...

4L60E. Jeff and John have both given the correct answer to this question. Of the two options, start with checking the easiest and least expensive always. And in that case it would be the speed sensor.

...speed sensor 4L60E Part # 24203876 can this part be replaced from outside transmission or do you have to go inside the transmission? ck here.... ...