...regulator is rectangular. The replacement is rectangular with the corners cut off so forms a sort of hexagon Hi If it is the correct part then the wires should be the same colours as the ones to the ...
...regulator. 5. Unplug the connector to the alternator and hook your multimeter leads to the alternator (pin/socket selection does not matter) set the multimeter to AC volts, at an idle the multimeter ...
regulator. 5. Unplug the connector to the alternator and hook your multimeter leads to the alternator (pin/socket selection does not matter) set the multimeter to AC volts, at an idle the meter should
Question about 1998 YZF-R1
...regulator. 5. Unplug the connector to the alternator and hook your multimeter leads to the alternator (pin/socket selection does not matter) set the multimeter to AC volts, at an idle the multimeter ...
...regulator rectifier bought a bike and reg/rec faulty got a new one went to fit and someone had put wrong one on and had cut 6 pin plug off any ideas Hi, Dave I would love to help you but due to the ...
regulator. 5. Unplug the connector to the alternator and hook your multimeter leads to the alternator (pin/socket selection does not matter) set the multimeter to AC volts, at an idle the meter should
Question about 1998 YZF-R1
regulator. 5. Unplug the connector to the alternator and hook your multimeter leads to the alternator (pin/socket selection does not matter) set the multimeter to AC volts, at an idle the meter should
Question about 1998 YZF-R1
regulator. 5. Unplug the connector to the alternator and hook your multimeter leads to the alternator (pin/socket selection does not matter) set the multimeter to AC volts, at an idle the meter should
...regulator. 5. Unplug the connector to the alternator and hook your multimeter leads to the alternator (pin/socket selection does not matter) set the multimeter to AC volts, at an idle the multimeter ...
Question about 1998 YZF-R1
...pin regulator rectifier to change. Will the points and condenser will be the same 1991 KH 125 Kawasaki my 6v system has a three pin rectifier Any electronics would have to be changed . Not familiar ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions