SuperMicro X7DAL-E will not power up Please HELP! I've tested PSU and already RMA'd board once. All I get is a weak "erk" when I try to power up the system. X7DAL-E-O Dual LGA 771 board 2-Xeon 5410 4 ...
...650 watt PSU installed and have simply connected the PWR connector from the front panel across pins 1 and 2 on the JF1 connector block. The CPU fan spins up but there is no boot. The CPU is skt-604 ...
Question about SUPER P6 DGH (P6DGH-USA) Motherboard
how do the various power connections on the board work? My AT power supply died. Replace the Power Supply with one that has the same type connectors. When you plug them in the Mobo you will see a lock
Question about SUPER P6 DGH (P6DGH-USA) Motherboard
When my power supply died, it took out the plug. However, there are THREE different power inputs to the board=> AT, ATX, and one that looks like 1/2 of an AT power input. Which is why I was asking,
won't power on. standby 5v warning led is on. Hi, You could have a probelm with the connection where the power supply connects to the motherboard or you may have a bad power supply. If you have a ...
Question about SC743 TQ-650 - Tower - 4U - extended ATX - SATA/SAS - hot-swap - power supply 650 Watt - ... (CSE-743TQ-650) eATX Rack-Mountable Case
After replacing power supply, system will power up, but the power failure indicator light will not go off and the system will not boot. No power to the DVD or floppy drives. What might the issue be? ...
do you need a 24 power plug? for this motherboard? http://www.supermicro.com/products/motherboard/P4/E7210/P4SCi.cfm and if not how do i connect it then with a 20 power plug? Its better if you have 24
Question about X7DAL-E Server Board (X7DAL-E+-B) Motherboard
my supermicro x7dal-e motherboard restarts after shutdown can anybody solve my problem ?? my supermicro x7dal-e motherboard restarts after shutdown .i m tired to shut my pc down but it still restrats
Question about SUPER DL6 (P4DL6) Motherboard
i triger power switch but dose not work mother board Check to see if the problem is the Power On switch, or the Power Supply.Bypass the Power On ...
No Video when the system is turned on I have several Supermirco P8SCT motherboards that seems to be doing the same thing. When the power is turned on. I get no beep indicating the POST has passed. I ...
Usually answered in minutes!
8 Questions
7 Questions
6 Questions
5 Questions