...Module I have been trying to find a part that is no longer made. The part I need is for a Toshiba 65H82. It's called a signal/Conv Board PD0639D, the part # is 23787712 Any help would be
Question about 65H82 65" Rear Projection Television
Hi, I have a toshiba 65H82. When I watch DVD's or just about any show that has music and people talking...I cannot hear the people talking because the music is too load. Is there a way to adjust this ...
line are off 65h82 tv yes I have the same problem, although I did call toshiba and the guy said to me that it sounds like the projectors came off the track. he gave me this number where you can order ...
i have a 65h82 toshiba tv and i turn it on and the screen stays black but the tv is still on check the power, it may not be enough to carry the tv
Question about 65H82 65" Rear Projection Television
65H82 65 in. Rear Projection Television: MY TV just turned off, then the power light on the... My tv just turned off then the power light on the tv started blinkin. I unplugged it plugged it back in ...
i have a toshiba 65H82 tv i need to move to my new house. can i lay it down or does it have to be upright? Move it upright best for the tv.These tvs have chemicals in it three CRT tubes colors guns. ...
Question about 65H82 65" Rear Projection Television
I have a Toshiba 65H82 and at first the picture was blurry but would clear up after about 10 mins now the picture just stays blurry. Can you tell me what the problem could be and if it is worth fixing
I have a Toshiba 65H82 television with the wavy line problem. I have read the solutions on this site. It talks about the "hyper board." The list of boards in the service manual does not list
...broken.http://www.searspartsdirect.com/partsdirect/part-model/Toshiba-Parts/Television-Parts/Model-65H82/1100/0333200/50021150/00001Good luck! Hope this helps and don't forget to ...
Question about 65H82 65" Rear Projection Television
How do I disassemble my Toshiba 65H82. I have removed the screws at the back and front but it won't move. Removing all screws front and back, but I still can't separate the two parts. Here you
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions