Questions & Answers for: 95 gmc 1 distributor cap Cars & Trucks

...gmc 350 1-8-4-3-6-5-7-2 Distributor turns clockwise Number one should be in the 5 oclock position. You should be able to draw an imaginary straight line between the coil tower and number one tower on ...

...95 gmc sierra 305ci manual trans It cranks but doent start I repaced the coil, cap, and rotore but still dont get spark, fuel pump works. ignitioin module inside the distributor. Timing Belt is ...

95 gmc sierra runs great then out of nowhere it stalls i wait 15 minutes and it starts back up have allready changed feul pump and relay any suggestions Plugged catalitic converter Do a vachum test to

...gmc S15? FIRING ORDERS To avoid confusion, ALWAYS replace spark plug wires one at a time. The most important thing to remember about the removal and installation of a distributor, cap or spark plug ...

...of a 95 gmc 350 to distributor cap. Want to make sure wires are going to right cylinders. Pictures help. email me at [email protected] that way I can send you pics instead of trying to

...95 gmc jimmy vacuum diagram. I have a loose Need 95 gmc jimmy vacuum line diagram. I have a loose vacuum line that appears to be routed behind the distributor cap area, firewall?? THat goes to your ...

...1 on the old cap before you take it off so you don't rotate the new one 180 out i have a 95 chevy blazer i bought with a bad engine they told me its a 95 but its a 93 my mechanic got it going but he ...

95 350's distributor If you are talking about a 350 Chevrolet (GM) engine, the #1 plug is at the drivers side front. To find the position on the cap, turn the engine 'till the timing mark on the lower

...front of the intake manifold. 1988-95 4.3L Engines Firing Order: 1-6-5-4-3-2 Distributor Rotation: Clockwise 1988-95 5.7L and 7.4L Engines Firing Order: 1-8-4-3-6-5-7-2 Distributor Rotation: ...

plug wire sequence on a 95 gmc 350 5.7 distributor cap can you tell me placement ofor on destributor cap for 5.7 liter. Think I crossed 2 wires