What optional accessories are available? Camera Case CS-DG900, CS-DG501, Leather Neck Strap NS-DG1000 USA/CANADA/TAIWAN/JAPAN : AC adapter AC-1L EUROPE /SINGAPORE/UK/HONG KONG/CHINA : AC adapter AC-11
Question about DiMAGE 7 Digital Camera
...the software update, please use a set of fully charged NI-MH (nickel hydrogen) batteries or the AC Adapter AC-1L or AC-2L (sold separately). When using the AC Adapter, be sure not to
...BC-400 overseas? No, you cannot. This is due, not only to the shape of the plug, but also to the fact that the AC cable for BC-400 do not comply with overseas regulations. Though the label on
Question about DiMAGE A2 Digital Camera
...using DiMAGE A2 abroad? The use of electronic transformers or travel adapters with this model via AC adapter or with the battery charger may cause damage to the product. Under these circumstances, ...
DiMAGE E201 overseas? Can I use DiMAGE E201 overseas? Yes. When using an AC adapter, please use the one suitable for the voltage level of your destination country. North America, Taiwan: AC adapter AC
AC adapter supplied by a third party Can I use an AC adapter supplied by a third party with the camera? No, Minolta cannot guarantee the compatibility of any third party AC Adapters. We recommend the ...
Question about DiMAGE E500 Digital Camera
...the camera is connected to the computer via USB cable? Yes. Please use the battery or dedicated AC adapter. For transferring large size of images, using AC adapter is
...you TIPS: 1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS! 2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR ...
...are usually caused by bad interlock switches or power problems verify that the wall voltage is 120V AC plus or minus 10% (108V AC - 132V AC) and the neutral to ground voltage is 0.5V AC or less. If ...
Question about Dimage Scan Elite 5400 II Film Scanner
software locked up and my entire 4 slide holder is stuck inside. Turn the device off. Disconnect the AC power. Reconnect the AC power. Turn the device on. See if you can "eject".
Usually answered in minutes!
123 Questions
131 Questions
86 Questions
79 Questions
77 Questions