...Add A Garment light on? If the Add A Garment light is on, then the washer door will unlock after the Pause/Cancel button is pressed once. Pressing the Start button will restart the washer at the same ...
Question about Oasis 27042 Top Load Washer
add garment light stays on after garments are added Machine says to add garments and will not wash even after garments are added. The add garments light stays on It appears your timer/main controller ...
Question about Duet GHW9150P Front Load Washer
...ADD-A-GARMENT" INDICATOR LIGHT ON DOOR WON'T UNLOCK WHEN PAUSE/CANCEL BUTTON IS DEPRESSED. MODELS: See additional page for Kenmore model numbers COMPLAINT: Due to a Microcomputer Machine Control ...
...add a garment" lit plus all the cicle lights FLASHING. It drains the water but will not spin (high) to drain the clothes. April 8 2002 DIV 26 SOURCE 110 KENMORE ELITE HE3 & HET WASHERS ...
...ADD-A-GARMENT" INDICATOR LIGHT ON DOOR WON'T UNLOCK WHEN PAUSE/CANCEL BUTTON IS DEPRESSED. MODELS: See additional page for Kenmore model numbers COMPLAINT: Due to a Microcomputer Machine Control ...
Question about HE2 Plus Front Load Washer
...add a garment light will come on, the tub will do a half spin and the door lock will come on while the add a garment light is still on. In addition to the pump problem is the door latch also damaged? ...
...add garment lights My HE2 Plus will fill with water, but when the tub reaches 1/2 full, it drains, and the pre wash/add garment lights keep blinking. When the tub is drained, the door unlocks and the ...
Question about Cabrio WTW5600XW Top Load Washer
add garment light is always on when the machine starts, there is noise and no water comes into the machine. The Add garment light is always on. why is there no water coming into my machine? Your water
Question about Cabrio WTW5600XW Top Load Washer
...door at add garment unlock, choose drain and spin it will finish. Whirlpool error code site: ...
Question about Cabrio WTW5600XW Top Load Washer
...add garment" light stays on and no other buttons work.There are no error codes.I ran diagnostic and got nothing.Could this be a door lock issue?or console board? It's not registering the add garment ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions