Questions & Answers for: adding r134a

adding r134a to 5.3l can you help me locate valve in low side tube to add r134a? all I find is a valve near the firewall in the SMALLER tube, and I know the larger tube is supposed to be the low ...

Adding R134A to my 1998 Jeep Grand Cherokee Limited In reading the directions on the R134A canister, the illustration shows the compressor clutch spinning/rotating. On my vehicke, this clutch is not ...

...adding oil and another can. The A/C system is normally a sealed system. This means the R134a only emptied if there was a leak. This system holds approx 24 oz of R134a (check label under the hood or ...

automotive r134a refrigerant in refrigerator compressor? Can automotive r134a refrigerant be added to a R134a refrigerator compressor? it is the same refrigerant however the car industry and the ...

How do I remove the Ac oil in my 89 corvette when switching from freon to 134 . How much should be added and where? I have upgraded or retrofitted older cars with r134a before with the ester oil and ...

not cooling added 2 cans of r134a no change but the compressor seems to cycle off during acceration you need to see a a/c tech you need to pull a vacume at the same time your adding R 134 and oil

...85-90 degrees between 45-50 pounds on the low side were you add it so basiclly keep adding till those pressures are reached please do not add r134a if you have not had system converted over from ...

Replaced all A/C major components (compressor, filter-drier accumulator, and orifice tube) except condenser due to a seized compressor and failed clutch bearing. Flushed system and appeared to have no

where to add freon A 2007 Lexus doesn't use Freon, it uses R134a. If the system is low on R134a, then you really need to find the source of the leak and fix it. A/C coolant is not something you just ...

...adding r134a to the system, the new hoses you get with the r134a will only fit on the low side of the system. It is not like in the old days and the gage would fit on both sides. What with that said ...