Questions & Answers for: adf cover

Question about M4097DVRS Path-Through Scanner, Flatbed Scanner

1 Answer

...ADF cover open. Could anybody tell me where the sensor is located and/or any other information, test or solution for it? Sincerely ET This may help: I don't have a Fujitsu, but a M/F is a M/F, all ...

Ad

Question about Officejet Pro L7680 All-In-One Printer

1 Answer

...ADF cover. While lifting the blue-green lever, carefully rotate the pick assembly toward the open ADF cover until it stops. Examine the pick assembly. Make sure the bottom roller is held firmly in ...

Ad

Question about Officejet Pro L7680 All-In-One Printer

2 Answers

...ADF cover. Lightly dampen a clean, soft, lint-free cloth with distilled water, and then squeeze any excess liquid from the cloth. Use the damp cloth to wipe any residue off the rollers and separator ...

Question about PIXMA MX310 All-In-One Printer

2 Answers

...ADF, then open the Feeder Cover. Remove the jammed page from under the roller to the Feeder Cover side. Pull out the jammed document from the ADF. If the document cannot be easily pulled out, proceed ...

Question about MFC 8820D All-In-One Laser Printer

2 Answers

...ADF cover open, so it just fed through onto the open cover), but it wouldn't feed through with the cover closed. I re-set in maintenance again and now it won't feed whether the ADF ...

Question about ScanSnap fi-5110EOX2 Pass-Through Scanner

1 Answer

...ADF cover is fixed on the top side (paper -entry) by arresting clamps and on the lower side (paper-exit) by hooks. Disassembling: - First remove the paper exit tray. - On the left and right side of ...

Question about PC-1080F Plain Paper Laser Fax

1 Answer

...ADF cover Check for any jammed paper in the rear of the ADF. Gently grasp any jammed paper in the ADF with both hands, and then pull the paper slowly but firmly upward to remove it. Lift the tab ...

Question about PC-1080F Plain Paper Laser Fax

2 Answers

...adf cover ADF cover refers to the Automatic Document Feeder cover. The ADF feeds your originals to the copy glass. The cover is opened to remove a jammed original. Just make sure the cover is closed. ...

...ADF) cover and remove any paper from the feeder. Locate the ADF pickup/roller assembly. It is located underneath the ADF cover and consists of a set of rollers that are used to feed paper into the ...

ADF cover. The ADF cover is located on the top of the printer. To open it, push the tab on the front of the cover and lift it up. Remove the ADF separation roller. The ADF separation roller is located

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...