Questions & Answers for: adf cover open error

Ad

Question about M4097DVRS Path-Through Scanner, Flatbed Scanner

1 Answer

...ADF cover open. Could anybody tell me where the sensor is located and/or any other information, test or solution for it? Sincerely ET This may help: I don't have a Fujitsu, but a M/F is a M/F, all ...

Ad

Question about Workio DP-2500E Copier

1 Answer

...ADF cover doesn't closed and it giving us error U2O if someone can help us............thank you U20 indicates the ADF cover is open, look to see if something is preventing the ADF cover from closing, ...

Ad

Question about Scanjet 8350 Flatbed Scanner

2 Answers

...you press on this arm, it should move freely up and down If the arm is stuck down, please contact Technical Support for troubleshooting options Close the ADF cover. DOCUMENT TRAY DOES NOT TAKE ...

Question about LaserJet 3055 All-In-One Printer

1 Answer

...ADF cover plate. Remove any jammed media with care.Take out the page gently. NOTE: Take care not to tear the paper. Close the ADF cover plate. Clear the jammed media from ADF (HP LaserJet 3390, 3392, ...

Question about PIXMA MX310 All-In-One Printer

2 Answers

...ADF, then open the Feeder Cover. Remove the jammed page from under the roller to the Feeder Cover side. Pull out the jammed document from the ADF. If the document cannot be easily pulled out, proceed ...

Question about PIXMA MX310 All-In-One Printer

1 Answer

...Is it worth repairing, as in cost prohibitive, or cheaper to buy a new one? Please advise. thank you hi. maybe is sensor problem in the adf. open the upper cover and check for little flag sensor

Question about PIXMA MX310 All-In-One Printer

2 Answers

...ADF, then open the Feeder Cover. 3. Raise the paper release lever (A) then remove the jammed page from under the roller to the Feeder Cover side. 4. Open the Document Cover and pull out the document ...

Question about PIXMA MX310 All-In-One Printer

1 Answer

...ADF paper chute),Guide P ASSY (Sheet guide), Feed roller cover (plate guide) and Brake roller cover installed correctly? 4. Clean the Feed rollers, Eject rollers,Plastic rollers, glass surface and ...

Question about 3115CN

2 Answers

...ADF Cover" and solution is Close the cover of the ADF Ho risolto cosi al " Errore Sportello aperto 005-301 - Chiudere ADF cover". Sollevate il coperchio piccolo dello scaner, all'interno c'? una ...

Question about Inkjet Multifunction - MFC-J5910DW

1 Answer

ADF cover is open The error indicates that the ADF cover is open, though it is totally closed. At first I ignored the error because when I opened & closed the ADF cover it comes back to normal, but ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...