Question about IntelliFAX 4100 Laser Fax
...ADF panel back in place (carefully so you don't break anything). Although I am not familar with your exact machine, this problem is almost always caused by a dirty machine. Often times someone will ...
...ADF. Open the top cover by lifting the lever on the right side of the top cover. Pull the original toward the front of your fax machine. Close the top cover. Press down on both sides of the top cover ...
Question about MFC-8440 All-In-One Laser Printer
...cover and check 4-lift ADF and lock into place and check printhead Paper jam in printers: 1. Turn the printer off and open the access cover. 2. Look for any obstructions in the paper path and remove ...
Question about MFC-8460N All-In-One Printer
cover of the ADF and inserted a blank paper on the left most slot by the hinge. I then pressed "stop/exit" which then took the paper through the ADF and when it came out, the small scrap of paper came
ADF cover open message not clearing When I open and close the ADF cover and press the stop/exit button to clear the error is not cleared from the machine. Is this a broken sensor? it might be a broken
Cover Open ERROR It says that my ADF Cover is open.. and I KNOW it's not. Sad =( i had same problem open it completely then put back on and try again it has sencors in side
Brother printer J6920DW ADF cover error It say cover is open, I have no paper jam, have opened and closed, unplugged unit several times. I think your fuser unit sensor guide is breaking replace
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions
