open the back cover and you find a two wire connector just near ribbon connector it is thermistor connector the printer is sensing this connector as open or not connected explore and fix. Good Luck!!!
Question about SCX 4521F All-In-One Laser Printer
...ADF by lifting the small cover. Check that there isn't any paper stuck in the rollers. Then check that the spring loaded paddle that closes the paper sensor when paper travels in, is working. It may ...
open the back cover and you find a two wire connector just near ribbon connector it is thermistor connector the printer is sensing this connector as open or not connected explore and fix. Good Luck!!!
Question about SCX 4521F All-In-One Laser Printer
...error when I feed paper through the ADF. Paper is accepted, but doesn't feed out, stops halfway with the Document Jam error. If I clear the jam and ensure all paper sensors are moving freely, and try ...
ADF, I get a document jam error after the last page. All the pages scan correctly but the ADF does not seem to recognize that the last page scan is complete. i.e. There is no jam at all, the documents
...adf. The contact image sensor hits the plastic and prevents its moving to its home position, hence the error message.You need to remove the rear, left and right covers. Next the top covers. the ...
Question about SCX4623F Laser All-in-One Printer
ADF (Automatic Document feeder) cover and inspect maybe something is stick to the glass and it appears always. Try to inspect carefully you may see some dirty if you find anything removable like piece
...open adf on samsung multi function printer to clean dirt. clean the all glass areas and also use compressed air to blow out the adf area on top and underneath the part you lift up, normall there is a ...
Question about SCX 4521F All-In-One Laser Printer
samsung scx-4521f ADF cover, what does it mean? That refers to the Automatic Document Feeder cover. If this is an error message, there may be a problem with the ADF that needs to be corrected
document jam error on scx4521f try to clean adf rollers or else replace them..
Usually answered in minutes!
1,017 Questions
482 Questions
305 Questions
287 Questions
235 Questions