Questions & Answers for: HP ScanJet adf paper jam scanning

Question about 5590 ScanJet Flatbed Scanner

1 Answer

...paper stuck in the ADF roller assy. You can check this by opening up the adf cover and inspecting the paper path. I have seen where a very small peice can cause paper path problems to where something ...

Ad

Question about Scanjet 8250 Flatbed Scanner

1 Answer

...ADF (feeder). It keeps saying there is a paper jam when the paper is just sitting in the tray. The scanner had not even moved the paper. Any ideas? I have cleaned the rollers. This sounds like a ...

Ad

Question about 5590 ScanJet Flatbed Scanner

1 Answer

paper from the ADF and I receive a blank document. If I go back through, and follow the same steps again, it then pulls from the ADF and scans correctly. Any suggestions? cannot possible to install in

paper on ADF Ok on flat bed Hi, Sounds strange but the scans that get feed through the ADF show some text through the paper on the reverse side almost like the paper is transparent but on the flat bed

Question about Scanjet 5590 Flatbed Scanner

2 Answers

...paper path, rollers etc. If the ADF jams continuously, lift the lid and check if the removable paper guide is placed correctly to feed the output tray. Had both these issues today, and this 5590 now ...

Question about Scanjet 5500c Flatbed Scanner

1 Answer

... do you know why that is happening. See the item is placed correctly on the scanner glass or in the ADF.Make sure that the item you are trying to scan is placed face down onthe glass, or face up in ...

Question about Scanjet 8350 Flatbed Scanner

2 Answers

ADF paper jam, when there is none Keeps saying ADF paper jam, however there is none. After doing the usual, turning it off, reinstalling the software, basically everything known to man, still says ...

Question about 5590 ScanJet Flatbed Scanner

1 Answer

...ADF all I get is a white page. I cannot find a solution. This is the second scanner I have had as I sent the first one back with the same problem. Maybe I am doing something wrong. You could be ...

Question about ScanJet 7650 Flatbed Scanner

1 Answer

...paper tears in adf Problem is in mechanical parts in ADF especially in rubber rollers so best solution is to change them. In this link below you can find (Hewlett-Packard Roller replacement kit for ...

Question about Scanjet 5590 Flatbed Scanner

1 Answer

paper jam has been detected I keep getting the above message....but there is no jam----message says an automatic document feeder paper jam has been detected. Clear the ham and try scanning again. 4[(2

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...