...Adjust the curb idle with the engine warmed up and the choke off. The air/fuel mixture screws should be adjusted with the engine warmed up and at normal idle speed, then turn each air/fuel mixture ...
Question about 2005 XL 1200 C Sportster Custom
...adjust the air flow mixture on a 2005 electra glide Hi Anonymous, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase ...
Question about 2000 FXSTS Springer Softail
...adjust fuel intake Hi Anonymous, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle counter clockwise to decrease ...
...adjust the carb Hi Anonymous, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle counter clockwise to decrease ...
...adjust the carbs on my 2003 honda shadow spirit 750 It seems to lean on the rear cylinder and rich on the front@ Let's focus on adjusting the air/fuel mixture. This adjustment can help balance the ...
Question about 2002 FXDL Dyna Low Rider
...adjust ldle air mixture on 2002 dyna low rider Hi Anonymous, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle ...
adjust air fuel mixture Hi Wentzpatrick, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle counter clockwise to ...
...air/fuel mixture screw inside a carb body lug that may or may not be plugged with an aluminum cap that's about 3/16" thick. This cap can be drilled out to acess the air/fuel mixture screw. Turning ...
Question about 2002 FXDL Dyna Low Rider
...adjust the air fuel mixture on 98 evinrude 15hp outboard On the 1998 Evinrude 15hp outboard, the air/fuel mixture is controlled by the carburetor. The carburetor is preset at the factory to provide ...
Question about 2002 FXDL Dyna Low Rider
...adjust the air/fuel mixture, you'll need to locate the carburetor and look for a small screw that can be turned. Keep in mind that the exact location of the screw may vary slightly depending on the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions