Questions & Answers for: adjust voltage plasma

...VS adjustment potentiometer. adjust the voltage down at least 10 volts, if your not an experienced person in electronics, get a person that is, there is a high voltage on that board that is ...

...adjust the voltage settings regardss dave I had this problem with my samsung. The samsung repair man said it was a voltage problem. He adjusted it but it still was there. Thank goodness it was still ...

upper left corner of blue snowy pixel patches. How do i adjust vscan voltage Try to adjust the V scan voltage down about 5-10V. If still not working, also try to adjust the Vs voltage down about 5-10V

adjust the VS-voltages and the V-scan voltages How does one go about adjusting the voltages? Thank you Hi, this is Tee and I had someone come out and look at my 42 Plasma and that is exactly what they

objects on the screen of a samsung plasma hpr5052.You recomended a voltage adjustment.Is this something i can do or should i leave it to the pros? Thanks for the help doug You better to let pros doing

...plasma tvs get this. It usually is a to high/to low voltage setting inside the unit and needs to be adjusted. This should be done at a repair shop because the voltage needs to be watched with a volt ...

My Vizio has pixelation and blue and green colors only you can barely tell there is a definite picture but its all green or blue Hi; Have the digital board replaced, it might also be a good idea to ...

...plasma panel which provides each voltage setting. You can reference this sticker to make the proper adjustment. Using a DMM, connected between chassis ground and the panel voltage you are adjusting, ...

...plasma panel needs to be replaced. POssible voltage adjustments? You can check the va, vs adjustment, but alot of plasmas does this, my first thought would be the y sus board, it also could be the ...

...voltage adjustment. If you can't adjust it to proper value as suggested, the main power supply board need replacement. Even after replaced it with a new board, this adjustment should be done again. ...