Questions & Answers for: adjusting yamaha 9 shift cable

...shift into gear, but I don't know where the cable hooks onto the shifting lever. Do you know where it connects to? If the clutch lever is very easy to pull back (no tension) your cable is broke, if ...

Yamaha Vstar 650 Classic. When shifting gears, with the clutch engaged and the throttle handle closed, rpm does not decrease accordingly resulting in getting into the next gear at a too high rpm. idle

...Yamaha FJ 1100. and the engine is shifting very hard. @ Hi, Durdriver and the usual suspects are: 1. Clutch not adjusted properly. 2. Primary chaincase overfilled with lubricant. 3. Corners wore off ...

...adjusting screw needs to be backed off. 4. Air fuel mixture adjusted too lean start with 2 full turns. 5. Intake system air leak. 6. Fast idle choke ramp is not releasing. 7. Broken throttle return ...

...Yamaha Vstar. I replaced a perfeclty working clutch cable with an OEM stainless one, When you go to shift in first and release the clutch the motor dies. I have adjusted the cable and went so far as ...

...adjusting. 9. Heel/toe shifter coming in contact with the floorboard. 10. Transmission oil too heavy. For more information about your issue and valuable "FREE" downloads that you will need please ...

I have a 2005 Yamaha Kodiak 400 & it won't shift into park or reverse probably needs adjustment of shift cable.

...Yamaha outboard shift adjustment My motor is still in Forward in neutral position, neutral is backwhere reverse should be. How do I adjust this? Thanks! ...

...Yamaha V Star Classic 650 I have a 1998 V Star 650 Classic. The gears will shift easily when I'm sitting with the engine turned off. The clutch lever is "floppy" and won't engage to allow me to shift ...

...shift cable and the adjustment nut on it. 3. Put the gear selector in the "Park" position. 4. Loosen the lock nut on the cable adjustment. 5. Adjust the cable length by turning the adjustment nut to ...