Questions & Answers for: Yamaha Big Bear 400 4x4 adjusting yamaha 9 shift cable

i have a 89(i think)4x4 yamaha big bear 350 and it keeps breaking down...so far i figured out that it was the spark plug....so i replaced it...and it ran for a few days...but it would always rev high.

Serial number is:JY43HNN05PA134033 yamaha big bear want to know the year please. Is this a 2WD or a 4WD? .. I believe its a 2005.

how to set timing on yamaha 400 big bear 4 wheeler Got a 2001 400 big bear has good spark but won't fire off. I was told by a friend that it might have jumped time how would I go about timing this ...

i got a 95 big bear and i got a problem with a rough idle and back fires the thing has been sitting around for the last 2 years not running and i bought it off a bud of mine i thought a simple carb ...

choke not operating properly won't start cold with the choke on. It will start when it is warm out, but when choke is applided, it chokes out. I pulled cable out and plunger is working properly. Any ...

need a picture of both timeing marks on a Yamaha bear tracker

Why is my 1997 Yamaha big bear 350 not shifting Check the clutch cable. it could be loose.

2000 Yamaha big bear front differential rebuild. Removed limited slip (4KB-46470-11-00) and washers fell out. How to put back in and what order? go to an oem parts supplier (for example, ...

...Yamaha Beartracker, new carb. Runs OK at idle but bogs down when I hit the throttle and won't reach higher RPM. It runs fine at idle and driving around at low speeds. When I hit the throttle, though, ...

I have a Yamaha big bear 350 4x4 I put new cv axis on both front still make grinding sound If the CV Joints are new and correctly inserted, the most likely culprit for the noise would be the brakes. ...