Question about 2001 V Star 1100 Custom
...9. Intake air leak. 10. Fuel tank vent hose and vapor valve plugged, or fuel line closed off, restricting fuel flow. 11. Enricher valve inoperative. 12. Engine lubricant to heavy (winter ...
...adjusting screw needs to be backed off. 4. Air fuel mixture adjusted too lean start with 2 full turns. 5. Intake system air leak. 6. Fast idle choke ramp is not releasing. 7. Broken throttle return ...
...9. Stabilizer links worn or loose. 10. Rubber mounts loose or worn. 11. Rear fork pivot shaft nuts loose. 12. Front engine mounting bolts loose. For more information about your issue and valuable ...
...9. Head Gasket---HISS 10. Hydraulic Lifters---TAP 11. Pistons---SLAP 12. Rear Shocks---SQUEAK 13. Shifting Trans---CLUNK 14. Solid Lifters---TICK 15. Starters---CLICK 16. Connecting Rods ...
Question about 2000 V Star 1100 Custom
9. Air/fuel mixture screw improperly adjusted. 10. Accelerator pump damaged or not working. 11. Water or dirt in the fuel system, carburetor or filter. 12. Restricted, blocked or kinked fuel line. 13.
Question about 2000 V Star 1100 Custom
9. Air/fuel mixture screw improperly adjusted. 10. Accelerator pump damaged or not working. 11. Water or dirt in the fuel system, carburetor or filter. 12. Restricted, blocked or kinked fuel line. 13.
Question about 2000 V Star 1100 Custom
Yamaha V Star 1100 Custom carb slow to return to idle 1999, cables loose, goes to throttle stop but takes a while to return to idle Hi, Anonymous and the usual suspects are: 1. Throttle cables ...
...9. Restricted fuel supply passages. 10. Plugged jets or passages. 11. Worn or damaged needle or needle jet. 12. The enrichner valve not seated or leaking. For more information about your issue and ...
...9. Restricted fuel supply passages. 10. Plugged jets or passages. 11. Worn or damaged needle or needle jet. 12. The enrichner valve not seated or leaking. For more information about your issue and ...
Question about 2006 V Star 1100 Custom
...adjusting screw set too low. 8. Air/fuel mixture screw set too lean. 9. Idle port, transfer ports, slow air jet clogged. 10. Slow fuel jet clogged. 11. Faulty fuel pump. For more information about ...
Usually answered in minutes!
48 Questions
44 Questions
31 Questions
26 Questions
22 Questions