Questions & Answers for: Chevrolet Monte Carlo air actuator

air temperature actuator) motor is bad. It's pretty common. The bad part is located under the dash on the driver's side, toward the center of the dash It is mounted on some AC ducting, with the top of

...mc.driverside hot air only regarless of setting, passenger side woks as should, this is with the a/c on. Sounds like the temperature door control actuator needs to be replaced on the driver's

Air doesn't work on passenger side. We added freon and now the driver's side air conditioning works, but the passenger side blows warm air. It has a dual temp control. The air control actuators under ...

...air Hello. The side that is not operating properly has a bad temp door actuator located up under the dash. I am assuming this vehicle has driver/passenger(dual)climate control heat and cold settings. ...

...air even when the control switch is on the heat my passenger side works fine Hello and welcome. this is caused by a bad temp door actuator for the drivers temp door. you will need to replace the ...

bracket bracket. Disconnect the electrical connector from the left air temperature actuator. Remove the mounting screws from the left air temperature actuator. Remove the left air temperature actuator

...actuator - Intake air leak - Poor electrical connection to the Intake Air Control (IAC) valve solution !!! If there are no intake leaks, clean throttle body, adjust engine idle and erase engine code. ...

do a air blend door actuator on a 2007 chevrolet monte carlo need to be calibrated No just ensure the shape of the actuator fits securely to the part it fist to before securing actuator to the vehicle

my 2005 monte carlo heater blows cold air from drivers vents and hot air form passagenger vents . Can someone please tell me why blend door actuator

...blend door actuator. ... Thanks for the video, need to do this on my 04 monte carlo ss, went to use the heat today .... 2003 Chevy Suburban AC-heater air direction problem.mov - Duration: 1:36. by