...amber and remains that way for approximately 15 minutes, after that TV will turn on again TV goes on green light stays on no video about 10 seconds then goes to red lamp light Mitsubishi has problems ...
Question about WS-65513 65" Rear Projection HDTV
...light turned amber and we heard the sound of the tv and then it shut off and the red light "lamp" indicator came on again. unplug the set for over an hour, if the same thing happenes you will need ...
Question about WD-62725 62" Rear Projection HDTV-Ready Television
...amber light indicating a new lamp was needed. Replaced with new lamp and still have solid amber light. I have unplugged the tv and replugged but the light still comes on. Its working fine, and ...
...amber light with a blinking green light. I power it down...wait a few minutes and turn it back on. The amber light remains on and the green light comes on, I have sound with no picture. Then I power ...
...light (AMBER) is lit constantly, but the tv works just a little bit dark (pic not very sharp). What does this light indication mean? aquaroyal, It is telling you to replace the lamp in your set. You ...
Question about WD-65733 65" HDTV
...amber/green light turns red and tv shuts off....help please WD-65737 tv can be on for about 15 minutes and a amber to green and even to a red light will come on and then the tv shuts off. When the tv ...
...amber) light means: lamp door interlock switch is off or malfunction. green blinking: set is initializing, about to begin normal operation. So: quite possible that lamp has been replaced incorrectly ...
Question about WD-65733 65" HDTV
Amber light on front of Mitsubishi tv comes On and pic goes off is that an lcd type or projection type model of mitsubishi?
Question about WD73737
tv turns off by itself with an amber or red flashing light. lamp replaced about 6 months ago. Should be a high voltage or power circuit problem,like transistor too hot,or any component short circuit.
Question about 276P595010 DLP Chip 1910-6143W, 1910-6145W, 1910-6103W, 1910-6106W, 1910-6146W, X1910-6143W
...power only the amber indicator light is on changed 1910-6143w chip was replaced after instalation tv will not power up Go back and check all your board wiring. sometimes j1 can be reversed with a
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions