Questions & Answers for: Zanussi anti jam light

...light are flashing together and the machine stops working altogether after a minute. ANTI-FLOODING CONTROL SYSTEM ALARM [A L 4] Leds [LD9] + [LD10] This control system is operative during the washing ...

Zanussi Aquacycle 1200 During a normal 40 degree daily wash machine stopped. Full of water cannot get it to drain gad to do emergency drain proceedure. When I select program machine clicks and says ...

...machine does the drum pully fixing bolt have a right hand or a left hand thread ie does it unscrew anti-clockwise or clockwize?? It should be a normal right hand thread, unscrew anti-clockwise. If ...

...light is on but on the right the first two lights are flashing together. help zanussi aqua pulse de 6744 s Hi, the first thing the dishwasher does is fill with water, so this sounds like a Anti Flood ...

...work is to undo the screw on the pulley,this is normally a torx screw,you will have to undo in an anti-clockwise direction,then gently prise off the pulley but be careful its soft alloy and could ...

...dishwasher which has stopped working. Having used the diagnostic facility it has come up with anti flood device, I have done the usual rocking the machine back and forth no sign of water. I

...work is to undo the screw on the pulley,this is normally a torx screw,you will have to undo in an anti-clockwise direction,then gently prise off the pulley but be careful its soft alloy and could ...

Machine had been giving E20 error code - filter cleared and it re-started ok. When wash was in progress - jammed at rinse stage and all lights came on (except spin speeds) and humming noise and ...

My machine had been giving E20 error code - cleaned out filter and pressed start button and it started again ok. During wash it jammed and all lights went on (except spin speeds) and it wouldn't ...

...on and move to different programs this is a test program to take it off test turn to off then turn anti clock ...