...mode. I use the AP-U70 with Vista and even then it works, although the program for making adjustments does not. By telling you this I want to say that the AP-U70 is rather compatible and not one of ...
Question about OfficeConnect (3CRWE454G75) 802.11b/g Wireless Access Point
...AP mode and set 2nd to AP repeater mode(with the 1st mac address), together 2nd AP does not work while 1st AP work in AP mode. Both APs have the same SSID, channel, security mode, encryption code, ...
Question about DWL-G700AP 802.11g/b Wireless Access Point
...AP in Repeating mode, he finds the wlan but he can not connect. Could anyone please tell me how to get the accesspoint working. I want to use the AP to enlarge my wlan. It should be the same network, ...
ap mode i'm hearing the only way to access the ap once in that mode is through a serial cable. i've yet to be successful in that too though Ignore the rumors. It's perfectly simply to converse with ...
Question about : DWL-2100AP Wireless-G 108Mbps Access Point (NEDLWP10)
...On each device set the MAC address of the other device. Solution #2 Set the DWL2100 as "WDS with AP Mode" and the DWL2000 in "Bridge Mode". On each device set the MAC address of the other
Question about WAP-0005 (DHWAP0005) 802.11b/g Wireless Access Point
wireless modem/router (NetFaster IAD). What should the AP's settings be? AP mode? Wireless Bridge mode? or Repeater mode? Use AP mode ; but may really have some compatiblity issues though... Good Luck
...The disadvantage of infrastructure wireless networks is simply the additional cost to purchase AP hardware. Note that home wireless routers all feature a built-in AP to support infrastructure
Question about AirPremier DAP-2590 N Dual Band PoE Access Point - IEEE 802.11n (draft), IEEE 802.11a/b/g 300... (ITEDAP2590WNT1)
How to configure DAP 2590 AP in wireless bridge mode? Which of the four available modes ( AP, WDS, WDS with AP, Client, equates to wireless bridge mode? Client would be the closest thing to a bridge.
Question about AirPremier DAP-2590 N Dual Band PoE Access Point - IEEE 802.11n (draft), IEEE 802.11a/b/g 300... (ITEDAP2590WNT1)
...mode. If a trunk interface is connected to an AP, the PVID of the interface must be set to the management VLAN ID. Differences in configuration on intermediate switches are as follows: In tunnel ...
Question about AirPremier DAP-2590 N Dual Band PoE Access Point - IEEE 802.11n (draft), IEEE 802.11a/b/g 300... (ITEDAP2590WNT1)
...mode wants to enter a sleep state, the adapter indicates this intention to the wireless AP. The adapter does this by setting the power save option in its packets or in the 802.11 frames that it sends ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions