Questions & Answers for: Makita armature

...power. You have either one of 2 problems. Either you have a brush that is hung up and burnt or the armature is bad. If you are comfortable in removing the brushes first unplug the tool and remove

something wrong with the armature I have a makita 5" angle grinder model 9005b, I think the armature shorted out. Can anyone tell me how to remove the armature for inspection? If the armature is shot,

Looking for an armature for Makita 2400B Mitre saw. Hello I would look on ebay or craigslist for the armature. Just type in make and model armature.

I can not remove armature caseing from makita miter saw I have removed armature but can not remove caseing The casing at the saw end will have an inside case that is bolted either from behind the ...

can i remove my armature 2414 from winding and how in what way? If it is the old style 2414 remove the 4 screws holding the guard on. Take the brushes out, you should then be able to lift the main ...

...are worn down or the springs are collapsed and the brushes are not making good contact with the armature. b) The armature contact (commutator) is damaged or there is a short in the armature ...

...measure of the batterie if its loaden ,only if the brushes are to short replace also anyway the armature and brushes BOTH . it is not good to switch only the carbonbrushes because of a marketing ...

saw stopped working, changed brushes, still will not turn These are notorious for burning out the armatures. If you are comfortable opening the tool up you can tell very quickly - I have sent a link ...

...turns freely, smoothly, and quietly. The running motor is slow, with a loud "grinding" sound. Armature Problem? Measure the value difference in Ohm between the carbon brushes on the armature ...

Makita bhp454 overheated, not turning clockwise. It is very common for the armature to overheat and melt down. Open it up and inspect the armature, it will be very obvious it is burnt. If it is the ...