Questions & Answers for: Pontiac atm circuit

My check engine light has come on in my 2006 Pontiac G6 after 2 and a half years. What could possibly be wrong since I keep my car serviced and the guys had just told me that my car was in tip top ...

Ad

what component does engine code P1635B on a GM vehicle deal with? Trouble Code: P1635 5-Volt Reference 'A' Circuit Malfunction Possible Causes: 5v VREF circuit is shorted to sensor ground or chassis ...

Ad

What is this circuit breaker everyone keeps talking about A circuit breaker is similiar to a fuse (a circuit protector that will burn out when too much current is pushed through it). The difference is

Question about 2006 G6

1 Answer

4 cyl. 2006 G6. P0106 code is present, engine light is on, car hard shifts from 1st to 2nd gear (automatic). Mechanic states NOT the transmission, but, Map or Baro pressure circuit is out of range. ...

Question about 2001 Sunfire

1 Answer

atm. Battery stays around 12.5v to 12.1v while running. I guess my first question is what is the alternator output at idle ?You can't test an alternator by disconnecting the battery like we did 40

I have a 97 Trans Am WS.6 and I have 3 codes, P0200 - Injector Circuit, P0410 - Secondary Air Injection System, & P1222 - Injector Control Circuit causing my car to idel rough and barely has any ...

Question about 2006 Torrent

2 Answers

what is the firing order 2006 Pontiac Torrent firing order Google Search There are 3 dual-tower ignition coils that are part of the ignition control module (ICM). The ICM contains coil driver circuits

I have a Pontiac G6 v6 3.9 .. I have a code p2078 twice.. do I have to change the intake manifold tuning valve sensor or what? What year is it ? DTC P2078: Intake Manifold Tuning (IMT) Valve Position ...

2007 Pontiac G6 hdtp/conv rear inside deck lid doesn't go down enough to be picked up by trunk going down. Side wings are picked up ok. Did you take it to a qualified repair shop? Do you know what DTC

NO POWER TO THIRD BRAKE LIGHT ON A 2007 PONTIAC G6 Stop Lamps The brake pedal position sensor is used to sense the action of the driver application of the brake pedal. The brake pedal position sensor ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...