Questions & Answers for: Zyxel atm circuit

...ATM circuit: Each port requires one or more VPI/VCI circuit. You could map different circuits to corresponding vlans. The config below creates a primary circuit 1/35 on each port. On ports 5 and 9 is ...

...using WEB through 192.168.1.1) I get a report ethernet connection pass adsl synchro pass test adsl(ATM OAM) loop back test fail (so also PPP/PPPoE server condition fail and ping default gateway ...

...is on and green, the Internet light is off.The status says that DSL is up at 37 kbps / 42 kbps and ATM loopback fails. Also, WAN has no ip (0.0.0.0) Is it a problem of our zyxel or is it sth wrong ...

...more than it should, but I suspect that Centurylink is pushing the packets through 3 or 4 pieces of ATM hardware to get them to me, so there may be nothing that the Zyxel can do about it. If you ...

One of the things I've noted on my pre-configured router is that it uses specific settings for the ATM stuff that matches what my local Telco expects, and I can't change them. I would not expect this

I was helping a friend who has Earthlink DSL (a ZyXel DSL modem) to get her Linksys WRT160N wireless router working with the Earthlink modem. No luck. Earthlink won't help unless you pay $7.95/mo with

is a house plug with a cfic braker light suppose to be red or green my plugs stopped working in my house the cfic light is red Most are green when functioning properly. Many have no lights at all. Try