OK when switch is on auto mode, but when switched to "Scene" mode cannot shoot, switch back to auto mode / movie mode, or turn off. If power is turn on when switch is in "Movie" mode, everything is OK
...until time selected gives a response then press ok momentary. The auto on/off should now work. If it still fails, press the reset button next to on/off and try this method again. It will now
...same button again - this enters settings push down and ok - this goes to text message settings push ok - selects auto text push up, then ok - changes from "off" to "on" then selects that should do
...on 42000 on the nose it says not to drive too long oil ok temp ok tranny ok now what please help thank you TAKE IT TO ADVANCE AUTO OR AUTO ZONE TO SCAN IT .TO TELL YOU YOUR CHECK ENGINE LIGHT
...ok the problem is corrosion of the ground wire and connection to the frame, or corrosion in the bulb sockets. for starters go to any auto parts store and get an aerosol can of contact cleaner ...
Question about Stylus Multifunction Printer/ Copier/ Scanner/ Fax
"AUTO" next to it) to turn on Auto Answer Mode. Press OK (for the 4 millionth time it seems!) Finally, press "Menu" to return to the first screen in Fax mode.Hopefully that will resolve your problem :
Also, if you don't want to use the flash, put the flash on AUTO and press menu, go to "Set up", scroll to "Anti-shake AE" and set it to "Auto", press OK to save settings and try taking pictures again
Question about COOLPIX L20 Digital Camera
...doesn't work on one touch when closing the window! it works OK one touch opening! Any easy fix ideas!? it is not supposed to auto close for safety reasons. it is only auto
Question about Security Simon 3 Wireless Home Security System
...OK". Press the down arrow until "auto phone test tm" appears on display. Press" OK". use up and down arrows to adjust to "off". Press"OK". press "Status" and "timers" is shown. Press up arrows until ...
Question about 32LD350 32 in. LCD TV
...tune the channels as found in the manual On your remote, press Menu. select Channel and press OK on your remote.select Auto Tuning and press OK on your remote.select Yes and press OK on your
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions