Questions & Answers for: Kenwood aux volume control

...Aux, and Tape outputs don't play any sounds. The tape if turned all the way up will play a very very dim amount of my music that i have plugged into it, but its barely hearable. I get absolutely ...

...volume knob) then pressing the control knob up till I found the AUX options and put it on AUX2 so I wouldn't hear the audio feedback. copy & paste into your browser: ...

...aux" input. After that is enabled you will be able to select it from using the "src" or source button. To control the ipod you need to connect the ipod using the proper cable, this one here. Ensure ...

...volume knob (and its attendent buttons beneath, Mute and AV Aux) do not work; I think because at one point in the receivers life someone stood the receiver up with the front-face plate pointing down, ...

...standby mode. then hold your bass boost button in and the menu should pop up. scroll through until you find th aux setting and use your volume control to set it to on. then the option should be

volume return Tuner Features - 24 presets: 18 FM, 6 MW/LW - K3I clean reception Tuner - Radio Data System (RDS) with Radio text - Auto memory entry (AME) - Up/Down seek tuning - Local Seek - FM Stereo

...volume... Have you connected the rca plugs to the radio or amp directly? If you've connected it to the radio make sure that the input level controls are adjusted AND available on that model (it will ...

...volume knob down for a second, you can adjust the dB level. If still nothing, check if the sub is on. On the main display, hold down on the control knob for two seconds, if will toggle the sub on or ...

...Aux (or CD) stereo input on your Kenwood Receiver. Below I've put in the link to the manual for your TV. Look on page 10. Use the receiver volume control and you are in business. ...

...them to the "aux" socket of the amp, or another suitable - not a phono or deck - socket. You would have to keep the volume level low on the GPX unit, but apart from that all the functions should