...volume control applet does not adjust the gain on the C01U. You access the actual volume control for the C01U as follows: Start, Settings, Control Panel, Sounds and Audio Devices Click on Audio tab. ...
...me. go into control panel and change the input recording device as the samson c01u then press the volume button then readjust the volume =D although the play back i'm still tryign to figure that ...
Question about G-TRACK USB RECORDING MICROPHONE Microphone
volume can be changed by going to Control Panel and opening Sounds and Audio Devices To use the G Track as your default input/output device (for system sounds and programs like Sound Recorder), ensure
Question about R21S Microphone
what do you hook the microphone up on a stereo in order for it to work? My son says it is the AUX setting? I have this microphone (SAmson R21S) and would like to use it but am unsure of where to plug ...
Question about G-TRACK USB RECORDING MICROPHONE Microphone
...volume control tab, recording.. the usb audio codec has no volume controls and it will not allow me to highlight the usb device for recording. im using xp 64 Hey same problem here, mine is also not ...
...volume up on the c01u microphone beacause i barely hear myself when i talk Since it's probably going through some form of electronics I would think that is where your volume control would be. Name
volume control - this will vary from one system to another. With a computer just plug it onto the microphone input socket (usually colour coded red or pink) You will also need to enable it in 'control
...click Speaker Volume and adjust slider to suit. You might put a check mark in the box to show the volume control on the Task Bar so you can go straight to it to make adjustments in the
...volume control won't affect the recording. You will need to turn up the AUX control for each channel you wish to record, and also make sure that the AUX master is up. Depending on the software/ ...
...aux sends on that mixer so quite easy to use one of those to feed the external power amp. You could have one set of spkrs connected to that amp and another connected to the powered mixer. This would ...
Usually answered in minutes!
86 Questions
43 Questions
23 Questions
17 Questions