Questions & Answers for: Chevrolet Monte Carlo awm8121 drain pump

Question about 2005 Monte Carlo

2 Answers

pump in a 2005 Chev Monte Carlo? On the 3.4.... Drain coolant, remove drive belt guard, loosen pulley bolts, remove drive belt, remove pulley, remove water pump. Good idea to check the belt for cracks

Ad

Question about 1996 Monte Carlo

2 Answers

...Drain radiator. Use 10 millimeter wrench and loosen water pump pulley bolts. The easy way to prevent pulley from turning is place a 3/8 inch drive ratchet in the belt tensioner and increase belt ...

Ad

Question about 1995 Monte Carlo

1 Answer

1995 monte carlo starting and run problems why does ny 1995 monte carlo after sitting 2 or more hours, takes several tries to start with engine turning over very fast, then after starting tries to die

...pump. ^ Tighten the fitting to 27 Nm (20 ft. lbs.). 4. Install the power steering pressure hose to the power steering gear. ^ Tighten the pressure hose fitting to 27 Nm (20 ft. lbs.). 5. Install the ...

pump on a 2006 monte carlo Drain the cooling system. Refer to Draining and Filling Cooling System (LS4 Static Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9 Static Fill) Draining and Filling

...pump remove the gas tank and it is on the top of the tank its a bit involved you might want to let your mechAnic do it figure around 500 bucks This is a very dangerous job. You will have to lift the ...

water leaking into 2002 monte carlo floor. where are the drain holes in the rocker panel? there are none. you either have a bad heater core or your air conditioner drain hose is clogged. It should be ...

Question about 1999 Monte Carlo

1 Answer

...drain **** for radiator and the fins on the radiator for fluid leaking. The water pump housing and at the weep hole is another place to check. If it is leaking from the fins they do sell a stop leak. ...

...pump cooling fan a really good cooling fans work properly when I land around town new head gaskets ugh no leaks good in the engine . Check your radiator for good flow. Drain a little coolant and look ...

...should be able to take the small hose loose at the radiator filler neck and drain the overflow. Or use a syphon pump to pull coolant out of the tank. The syphon hose would be the less messy way to

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...