Questions & Answers for: awm 5145 5

Question about AWM5145/2 Front Load Washer

1 Answer

Awm 5145 Hi I have a leak and it seems to be coming from the front left hand side of the machine only between cycle 10 and A. I have check the seal and the hoses and they seem fine? please help me ...

Ad

Question about AWM5145/2 Front Load Washer

1 Answer

...awm 5145-2 washer not wrorking, filter full of water, water not coming iunto machine, water is coming into the pipes from the mains but is not releasing into machione. when a program is selected it ...

Ad

Question about AWM5145/2 Front Load Washer

1 Answer

...awm 5145/4 machine starts to spin then stops.I have to select seperate spin programe to get full spin and this works fine .Any help will be appreciated,thanks FILTER MAY BE BLOCKED IRE CLOSE ...

Question about AWM5145/2 Front Load Washer

1 Answer

...awm 5145 the counter turnsbut nothing happens Check the lid switch. There should be a small pin on the lid that will push the lid switch down when it is closed. There are two wires going to the lid ...

Question about AWM5145/2 Front Load Washer

1 Answer

...AWM 5145 washer the drum bearing has failed (rattling when turned by hand, screams in spin + smells) Its a DIY fix to change the bearings, and how much do they cost? Many thanks It's not a DIY fix ...

Question about AWM5145/2 Front Load Washer

1 Answer

how do i open the filter cover for my whirlpool awm 5145/3 washing machine? Tip is back a hair and remove the screws and bottom panel then grab the cap

Question about AWM5145/2 Front Load Washer

1 Answer

My Whirlpool AWM 5145/5 no longer takes the powder and fabric conditioner, I have tried cleaning the drawer and behind but this hasn't helped. Any ideas? you'll need a new dipenser unit

Question about AWM5145/2 Front Load Washer

1 Answer

...awm 5145/3 washing mashine. it stopped working yesterday. it is getting power to it but when u select ur program it doesnt do any thing. it doesnt start. the only program that works is the drain ...

Question about AWM5125/1 Front Load Washer

1 Answer

...awm 5145/4 has stopped working! There is still power going to it but when you select a programme it does nothing,but it will drain,someone has suggested the brushes,where are these located on this ...

Question about AWM5125/1 Front Load Washer

2 Answers

AWM 5145/4 washing machine is not filling, I have checked the water inlet valves both clear and both have a resistance of 4k ohm, I have checked the water level valve and it works electrically, I have

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...