...computer back to its original factory specifications when it was first bought but when I reboot my computer and press f10 which takes me too the boot menu I just get taken back to windows desktop my ...
...camera. It erased all of my pictures that i had copied onto the computer. I would like to get them back onto my camera just copy and paste from computer to the mem card on your camera via my ...
...computer back up, so i had to call my internet provider and i got main computer back up, and now if i unplug main computer plug and plug it back into rounter and plugg enthernet cord back to main ...
computer back on as you normally would. It may come back to the screen that asks you if you want to start windows normally or in safe mode. Start windows normally if you do not know how it got to that
Question about Aspire AM5641-U5520A PC Desktop
...back of your computer 2. Power cycle your computer tower by pressing the power button for 15 seconds 3. Plug the power cord back in and monitor cable at the back of your computer tower (if it turned ...
Question about vs15 15"LCD Flat Panel Monitor
...COMPUTER BACK IN . RECONNECT MONITOR TO THE BACK OF THE COMPUTER AND PLUG IN. IF THIS WORKS, WAIT FOR NEW HARDWARE RECOGNIZED TO COME ON. FOLLOW INSTRUCTIONS, IF ANY. RESTART COMPUTER. input signal ...
...your printer from the computer. Unplug your printer from the wall and wait 1 minute then plug it back in. Turn your computer back on and after it is finished "booting up" plug your printer back
...computer back on. If this computer is a desktop: 1. Turn the computer off by pressing the power button for a bout 5seconds. 2. Unplug the power cable from the computer. 3. Press and hold the power ...
Question about 946 All-In-One InkJet Printer
...computer back into power. WAIT 1 minute. Turn the computer on. Load the Installation disk for the graphics card. Load the drivers, and user interface. (Nvidia Control Center)Already installed? Go to ...
Question about 946 All-In-One InkJet Printer
...computer back on. 2: If the keyboard has a USB plug, it is not necessary to turn off the computer first, just unplug the USB cable for a few seconds then plug the cable back into the computer. If it ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions